竞猜平台

    <p id="bptz5"><cite id="bptz5"></cite></p>

    <address id="bptz5"></address>

      <address id="bptz5"><nobr id="bptz5"><progress id="bptz5"></progress></nobr></address>
        <noframes id="bptz5">

            <address id="bptz5"><address id="bptz5"></address></address>

            Skip to main content

            March 2020

            Airtac 2 Improved

            Airtac 2 Improved is a mist spray rubber adhesive designed for temporary bonds. Airtac 2 Improved can be used on materials needing extra tack for placement on vertical or difficult surface areas. This product is ideally suited for tool shop applications such as temporary placement of details and pattern fabrication. Airtac 2 Improved meets many of the low VOC state restrictions for aerosol products.

            Wrightlease 4

            Wrightlease 4 is an extruded fluoropolymer film coated with silicone pressure sensitive adhesive. The orange color is highly visible on most substrates in addition to offering high elongation and tensile strength.

            OOA Beta Prepreg

            OOA Beta Prepreg is a new benzoxazine formulation that allows autoclave and out of autoclave (OOA) processing. OOA Beta Prepreg offers long term storage at room temperature. OOA Beta Prepreg has low resin shrinkage during cure and has a high glass transition temperature.

            NEW Vac Saver HT

            Vac Saver HT is a one way valve usable to protect vacuum bagged parts against vacuum loss which are multiple connected to a vacuum source. In case of a vacuum loss in a part which is connected to the same vacuum source, the Vac Saver HT closes automatically and protects this part against vacuum loss.

            NEW Corehold P-HA

            Corehold P-HA is a core holding film designed to hold honeycomb core and other core materials during machining. It is a polyester film coated on one side with a silicone free synthetic rubber adhesive. The film is supplied with a yellow backing release paper on one side.

            Stretch Flow P 2000

            Stretch Flow P 2000 is a knitted, polyester breather with excellent stretch properties. The high-stretch characteristics of Stretch Flow P 2000 enable it to conform to many complex contour surfaces, ensuring good application of pressure by vacuum bags.

            Vac Valve 429 SS HTR

            Vac Valve 429 SS HTR was designed for high temperature cures where standard valves with silicone rubber seals fail. Vac Valve 429 SS HTR is to be used for direct connection to vacuum hoses instead of complex and expensive coupling systems.

            CAMX Show in Dallas

            Come visit us at booth #V3 (Kay Bailey Hutchison Convention Center) at the CAMX show in Dallas, TX from 10/16-10/18! Learn more about our new products and innovations!

            NEW Thermalimide RCBS

            Thermalimide RCBS is a high performance release film treated on both sides for cure temperatures up to 761°F (405°C). Thermalimide RCBS is an ideal release film used during the forming process of thermoplastic materials and other high temperature applications.

            NEW Fast Tack HT

            New generation sealant tape for high temperature applications. Fast Tack HT builds tack quickly when applied to Thermalimide. Having good room temperature adhesion to the high temp bagging film reduces the time required to vacuum bag high temperature parts.

            NEW Airweave? UHT 300PGL & 450PGL

            Airweave? UHT 300PGL and Airweave? UHT 450PGL are premium non-woven blended, fiberglass breather for ultra high temperature applications. It is safer to use these breathers in place of woven fiberglass breathers.

            GS-333LT Vacuum Bag Sealant Tape

            GS-333LT is a low tack version of our standard GS-333 tape. GS-333LT is a sealant tape which has been designed to take longer cures and still remove cleanly.

            NEW Flashbreaker? 1R Pre-Cut Tape Strips

            Flashbreaker? 1R is now available in 1” x 2” (2.54 cm x 5.08 cm) Pre-Cut Tape Strips for customers who want to reduce touch labor and minimize the use of knives and scissors to avoid risk of hand injury. In addition, it eliminates the possibility of damaging the vacuum bag. There’s 2,500 cut strips per roll.

            Senegal Project

            On March 2018, Airtech supported the social program “Tambali Fii - Let's Start from Here” in Senegal (Western Africa) by offering vacuum bagging materials for resin infusion.

            NEW Pre-Cut Tape Strips

            We are now able to offer additional tapes in Pre-Cut format to customers who want to reduce touch labor and minimize the use of knives and scissors to avoid risk of hand injury. In addition, it eliminates the possibility of damaging the vacuum bag.

            NEW A4000 LFST Heat Shrinkable Release Film Tube

            A4000 LFST is a heat shrinkable lay-flat tube which has been oriented in the transverse direction. When exposed to heat 249 to 348°F (121 to 176°C) in a recirculating oven, tunnel oven or from a heat gun, the A4000 LFST material will shrink to closely fit the mandrel.

            NEW Airtac 3 Spray Adhesive and Air Trigger

            Airtac 3 is a new, safer spray adhesive designed for temporary bonding. Airtac 3 can be used to hold dry materials on contours and vertical surfaces. This product is ideally suited to resin infusion applications for holding reinforcement plies, release films, peel plies, and infusion mesh in place until the vacuum bag is secured. Airtac 3 has a fine pebble spray pattern which reduces airborne material. This reduces overspray and user exposure. Air trigger is sold separately.

            Airtech Asia Announces the Relocation to a New Building

            Airtech Asia is pleased to announce the relocation to a bigger facility in the same city, Tianjin, China. This expansion will allow more office, warehouse, and manufacturing space to support its growing customer base. The new address is: No. 161 of Anyuan Road, Chagugang County, Wuqing District, 301721, Tianjin, P.R. China

            NEW Combo-Tech

            Combo-Tech is our expanded product line that bonds various vacuum bagging materials together to form a better overall product and reduce “touch labor”, saving companies hours of labor expense while increasing productivity.

            Filmcote? 1524

            Filmcote? 1524 is an engineered film developed as a replacement for release liquids on the surface of mold tools. Filmcote? 1524 remains on the part surface after demold providing protection from damage or contamination during subsequent process.

            Beta TX 670 DISCO Prepreg

            Beta TX670 DISCO is a prepreg sold in sheet format. This special format allows for simpler and faster layups. Beta TX670 DISCO Prepreg has a 0°,+/-60° orientation, is quasi-isotropic within each ply, and comes with an engineered cut pattern that improves drapability.

              <p id="bptz5"><cite id="bptz5"></cite></p>

              <address id="bptz5"></address>

                <address id="bptz5"><nobr id="bptz5"><progress id="bptz5"></progress></nobr></address>
                  <noframes id="bptz5">

                      <address id="bptz5"><address id="bptz5"></address></address>

                      Foreign exchange

                      mailbox

                      Second-hand housing

                      Go abroad

                      mailbox

                      Premier League

                      Application Essentials

                      aviation

                      news